Skip to content
Parts expertise. A real person on the phone.727-609-1700

Part, part number, casting number, make or engine size

My Garage Cart

Ford 6.4L Powerstroke Head & Gasket Kit

2008–2010 Ford F-Series 6.4L Powerstroke; detailed source lists F-250 and F-350 Β· 2 heads + gasket set + bolts

No core required

$2,125.00

✓ 2-Year Unlimited Mileage Warranty
✓ No Core Charge — nothing to ship back
✓ In stock — ships in 2–5 business days
✓ Talk to a diesel person: 727-609-1700 (Mon–Fri, 8AM–5PM ET)
  • Brand new castings — not remanufactured, no core required
  • 21-4N stainless valves on both intake and exhaust
  • Thicker deck surface for stronger head gasket retention
  • Increased nickel content and upgraded metallurgy for long-term durability
  • Complete pair, assembled with valves, springs and retainers installed
  • Full head gasket set and head bolts
  • Guides sized and valve seats cut in-house on our Rottler equipment
  • Pressure tested before it ships

⚙️ Upgrades & Add-Ons

🛒 Your Selection

Total

Description

What’s Included

  • Complete pair of cylinder heads, assembled
  • 21-4N stainless intake & exhaust valves, springs and retainers installed
  • Full head gasket set and head bolts
6.4L Power Stroke Β· Brand New Β· Not Remanufactured
Complete Pair β€” 6.4L Power Stroke
Cylinder Heads Β· + Head Gasket Set & Bolts

Twin-turbo compound heat and a reputation for gasket trouble. Fix it with new castings.

Brand-new castings β€” not rebuilt cores of unknown history. Every head ships loaded with 21-4N stainless valves on both the intake and exhaust side, springs and retainers installed, cut, tested and ready to bolt on.

βš™οΈ 21-4N Stainless Valves β€” Intake & Exhaust
πŸ›‘οΈ 2-Year Unlimited Mileage Warranty
πŸ”¬ Pressure Tested to 60 PSI
↩️ No Core Required
Valve Spotlight
21-4N STAINLESS

The valve is the first thing in a diesel to see the fire, and the last to forgive a weak alloy.

21-4N (SAE EV8) is an austenitic stainless valve steel engineered for brutal exhaust heat. About 21% chromium forms a tough, self-healing oxide skin that fights scaling, burning and corrosive exhaust gas. Nitrogen and carbon are locked into the structure to hold hardness and strength at temperatures where ordinary valve steel starts to give up, and the nickel keeps that structure stable heat cycle after heat cycle. It’s a proven diesel exhaust valve alloy, and these heads run it on the intake side too, not just the exhaust.

~21% Cr
Chromium oxide shield against heat scaling and burning
~4% Ni
Keeps the structure stable through repeated heat cycles
N + C
Nitrogen and carbon strengthening for hot-end hardness
EV8
SAE valve steel designation for 21-4N
Intake: 21-4N
Exhaust: 21-4N
16 Valves Per Head
Why This Head
Built for compound-turbo heat

The 6.4 runs a compound turbo setup and puts heavy heat through the heads. 21-4N on both intake and exhaust valves.

Gasket-trouble platform

The 6.4 is known for head gasket failures under tow and tuning loads. Brand-new castings, not rebuilt cores.

Loaded and ready

Valves, springs and retainers are installed and ready to bolt on.

Included Upgrades
Head Gasket Set & Bolts Included

This kit ships with a full head gasket set and head bolts alongside the heads, so you can order everything for the job in one box.

Technical Specifications
Engine 6.4L Power Stroke Twin-Turbo Diesel
Years 2008–2010
Valve Train OHV Β· 4 valves per cylinder (16 per head)
Valve Material 21-4N Stainless β€” Intake & Exhaust
Quantity Complete pair β€” driver & passenger
Condition βœ“ Brand New β€” Not Remanufactured
Included Valves, springs & retainers installed
Gasket Surface Pre-milled and verified for MLS gaskets
Pressure Test 60 PSI
Core Charge None β€” no core required
Warranty 2-Year Unlimited Mileage
Built In-House

Every head runs through our process, not just pulled off a shelf and shipped.

Step 01
Chemical Clean & Debris Removal

Every casting is chemically cleaned and blown out, removing machining oils, shavings and debris so your oiling system starts clean.

Step 02
Guide Sizing & Valve Seat Cutting

Final guide sizing and multi-angle valve seat cutting done in-house on our Rottler equipment, so geometry and clearances are right before assembly.

Step 03
Pressure Tested

Every head is pressure tested to 60 PSI to confirm there are no porosity leaks or internal defects that could hurt cooling or oiling.

Step 04
Deck & Bore Inspection

Multi-point inspection of the gasket-sealing surface and bore alignment, because a flat deck is what a good head gasket seal depends on.

Step 05
Valvetrain Assembly

Valves, springs, retainers and seals are installed, with spring heights and seal seating checked.

Step 06
Vacuum Seal Verification

Intake and exhaust ports are vacuum tested to confirm an airtight valve-to-seat seal.

Check Before You Order
  • Not sure? Call us at 727-609-1700 and we will help you confirm fitment.
Vehicle Fitment
Ford F-250 6.4L: 2008–2010
Ford F-350 6.4L: 2008–2010
Full Year-By-Year Fitment List
2008 Ford F-250 6.4L
2009 Ford F-250 6.4L
2010 Ford F-250 6.4L
2008 Ford F-350 6.4L
2009 Ford F-350 6.4L
2010 Ford F-350 6.4L
Warranty & Core Return
2-Year Unlimited Mileage

No mileage cap. If a covered defect shows up, we make it right. View full warranty β†’

No Core Required

No core fee and nothing to ship back. Your old part is yours to keep or dispose of as you see fit.

The Heavy Duty Difference
Why Buy This Head From
Heavy Duty Parts Company?

Because a head is only as good as the shop that finished it. Sloppy work means repeat gasket failures and coolant where it doesn’t belong. Ours gets built like we’re the ones who have to answer for it, because we are.

NEW
Castings, not cores
21-4N
Intake + exhaust
60 PSI
Pressure tested
6
In-house steps
2 YR
Unlimited miles
$0
Core charge
01
Brand-new, not somebody’s leftovers

No rebuilt core with a mystery past, no previous owner’s overheating baked into the metal. Fresh casting, start to finish.

02
Finished by us, on our own machines

Guides sized and valve seats cut on our Rottler equipment, deck and bore inspected, valvetrain assembled, ports vacuum tested. It doesn’t get outsourced and hoped for the best.

03
Torture-tested before it leaves

Every head gets pressure tested to 60 PSI. A porosity leak gets found on our bench, not in your driveway after a weekend of teardown.

04
Valve steel that earns its keep

21-4N stainless on the intake and the exhaust. We didn’t cheap out on the part that lives in the fire.

05
Backed like we mean it

2-year unlimited mileage warranty. No core to ship back, no core fee. If a covered defect shows up, we make it right.

06
Somebody picks up who knows diesel

Not sure it fits? Call 727-609-1700 and talk to a person who will help you confirm fitment before you spend a dime.

Not shelf stock. A head we’d put on our own truck.
πŸ“ž Call 727-609-1700
Mon–Fri Β· 8AM–5PM Eastern Β· We Know Diesel

Please note: Parts, marine, and performance items carry specific warranty limitations. Please review our full Warranty Policy for details.

β˜…β˜…β˜…β˜…β˜…
Verified Google Reviews
β˜…β˜…β˜…β˜…β˜…

Best prices and customer service on Duramax LML heads out there. Shipped fast and very cool about how long it took to get the cores back.

β€” Dan
β˜…β˜…β˜…β˜…β˜…

They supplied me with a perfect set of heads to bring my 1999 Ford Ranger back to life. Ranger Frank has been in the family since the day he rolled off the showroom floor. Its great to have him back on the road.

β€” Ron Long
β˜…β˜…β˜…β˜…β˜…

Replacement heads for my 3.5 EcoBoost worked perfect. The kit had everything I needed. The customer service was excellent. Highly recommend this company.

β€” Alan H. Greendale, Sr.
β˜…β˜…β˜…β˜…β˜…

Great company!! The heads arrived in great shape with all the parts. Very quick email responses to questions, comments, and concerns. One little issue with a few parts but was taken care of promply

β€” Randy Tinsley

Your cart

Your cart is empty.

Shop parts
Your vehicles

My Garage

Keep the right parts one click away.

Add a vehicle

Start with your year. We’ll guide you from there.

Saved in this browser.

Upgrades & Add-Ons below ↓