New Pair Ford 2.9L V6 Ranger Bronco II Cylinder Heads W/ Head Gasket Set & Bolts | No Core Required

New Pair Ford 2.9L V6 Ranger Bronco II Cylinder Heads w/ Gasket Set & Bolts

New OEM-Quality Replacement Heads with Full Gasket Set and Bolts

Restore your engine’s mechanical integrity with this complete cylinder head and gasket kit, featuring a pair of all-new 2.9L Cologne V6 heads specifically engineered for Ford Ranger and Bronco II applications. These fresh, high-nickel iron castings feature reinforced water jackets and an upgraded deck thickness to eliminate the thermal stress cracking common in original thin-wall factory units. Although the gasket surfaces are pre-milled, every unit undergoes an in-house precision verification to ensure the Surface Roughness (Ra) meets the strict requirements for the included premium sealing set. We perform final guide sizing and multi-angle valve seat cutting on our Rottler equipment to ensure perfect valvetrain geometry and a 100% airtight seal. This professional-grade kit includes high-load head bolts and a comprehensive top-end gasket set, providing a permanent solution for long-term cooling system and combustion integrity.

🛠️ In-House Machining Process

• Debris-Free Preparation: Every new casting is chemically cleaned and blown out to remove all residual machining oils, metal shavings, and manufacturing debris. This ensures your oiling system remains uncontaminated from the first start-up.

• In-House Precision Machining: Unlike “shelf-stock” heads, we perform all final machine work in-house. This includes final guide sizing and precision valve seat cutting to ensure perfect geometry and clearances before the head reaches the assembly bench.

• Pressure & Integrity Testing: To go beyond the factory standard, we pressure-test every head to 60 PSI. This verifies that the casting is free of porosity leaks or internal defects that could compromise the cooling or oiling systems.

• Dimensional Inspection: Our technicians perform a multi-point inspection of the gasket-sealing surface and bore alignment. This ensures the head is perfectly flat and meets tight OEM tolerances for a flawless fit.

• Professional Assembly & Setup: Valvetrain components are installed and verified in a clean-room environment. We check spring heights and seal seating to ensure the assembly is balanced and ready for high-performance use.

• Vacuum-Seal Verification: Every intake and exhaust port is Vacuum Tested. This guarantees a 100% airtight seal between the valves and seats, ensuring maximum compression and peak performance right out of the box.

📊 Technical Specifications

• Engine Size: 2.9L V6
• Condition: New
• Fitment Type: Direct Replacement
• Each Cylinder Head Includes: Valves and Springs Installed
• Additional Hardware: Head Gasket Set and Bolts

🚛 Fitment Data

Common Applications:

• Ford Bronco II: 1986–1988 Ford Bronco II (2.9L V6)
• Ford Ranger: 1986–1988 Ford Ranger (2.9L V6)