New Ford 6.0 Turbo Diesel 20mm Cylinder Heads Pair With Performance Pushrods | No Core Required

New Ford 6.0L Powerstroke Turbo Diesel 20mm Cylinder Heads (Pair) with Performance Pushrods

OEM-Quality Replacement Cylinder Head Pair With High-Strength Performance Pushrods

Restore your engine’s mechanical integrity with this pair of all-new 20mm 6.0L Powerstroke cylinder heads, specifically engineered for late 2006–2007 Ford Super Duty and Excursion applications. These fresh, high-density castings are designed to withstand the extreme cylinder pressures and thermal loads inherent to the 6.0L platform. This kit includes performance-length chromoly pushrods, specifically sized to correct the valvetrain geometry and prevent the valve-to-piston interference common with factory-length components after a head swap. Although the gasket surfaces are pre-milled, every unit undergoes an in-house precision verification to ensure the Surface Roughness (Ra) meets the strict requirements for high-clamping Multi-Layer Steel (MLS) gaskets. We perform final guide sizing and multi-angle valve seat cutting on our Rottler equipment to ensure perfect valvetrain geometry and a 100% airtight seal. Pressure tested to 60 PSI and built for ‘bulletproof’ reliability, this package provides a professional-grade solution for long-term cooling system and valvetrain integrity

🛠️ In-House Machining Process

• Debris-Free Preparation: Every new casting is chemically cleaned and blown out to remove all residual machining oils, metal shavings, and manufacturing debris. This ensures your oiling system remains uncontaminated from the first start-up.

• In-House Precision Machining: Unlike “shelf-stock” heads, we perform all final machine work in-house. This includes final guide sizing and precision valve seat cutting to ensure perfect geometry and clearances before the head reaches the assembly bench.

• Pressure & Integrity Testing: To go beyond the factory standard, we pressure-test every head to 60 PSI. This verifies that the casting is free of porosity leaks or internal defects that could compromise the cooling or oiling systems.

• Dimensional Inspection: Our technicians perform a multi-point inspection of the gasket-sealing surface and bore alignment. This ensures the head is perfectly flat and meets tight OEM tolerances for a flawless fit.

• Professional Assembly & Setup: Valvetrain components are installed and verified in a clean-room environment. We check spring heights and seal seating to ensure the assembly is balanced and ready for high-performance use.

• Vacuum-Seal Verification: Every intake and exhaust port is Vacuum Tested. This guarantees a 100% airtight seal between the valves and seats, ensuring maximum compression and peak performance right out of the box.

📊 Technical Specifications

• Engine Size: 6.0L Turbo Diesel
• Size: 20mm Dowel
• Material: New Cast Iron
• Condition: Brand New
• Pushrod Specs: One-piece Chromoly steel, .080″ wall thickness, .344″ diameter, 9.795″ length
• Pushrod Interchange Part Numbers: Elgin: PR642, PR662; Ford: 8C3Z6565B; Navistar: 1873916C2
• Each Cylinder Head Includes: Valves and Springs Installed
• Additional Hardware: Performance Pushrods

🚛 Fitment Data

Common Applications:

• Ford E-350: 2006–2010 Ford E-350 (6.0L V8 Turbo Diesel)
• Ford F-250 Super Duty: 2006–2007 Ford F-250 Super Duty (6.0L V8 Turbo Diesel)
• Ford F-350 Super Duty: 2006–2007 Ford F-350 Super Duty (6.0L V8 Turbo Diesel)