Description
What’s Included
- Single cylinder head, assembled
- 21-4N stainless intake & exhaust valves, springs and retainers installed
Cylinder Head
Emissions-era Duramax, same old heat. Valves that can take regen cycles and heavy tow.
Brand-new castings β not rebuilt cores of unknown history. Every head ships loaded with 21-4N stainless valves on both the intake and exhaust side, springs and retainers installed, cut, tested and ready to bolt on.
The valve is the first thing in a diesel to see the fire, and the last to forgive a weak alloy.
21-4N (SAE EV8) is an austenitic stainless valve steel engineered for brutal exhaust heat. About 21% chromium forms a tough, self-healing oxide skin that fights scaling, burning and corrosive exhaust gas. Nitrogen and carbon are locked into the structure to hold hardness and strength at temperatures where ordinary valve steel starts to give up, and the nickel keeps that structure stable heat cycle after heat cycle. It’s a proven diesel exhaust valve alloy, and these heads run it on the intake side too, not just the exhaust.
DPF regens push exhaust temps up on purpose. 21-4N’s chromium oxide skin and nitrogen-strengthened structure are built for exactly that kind of heat.
Every heat cycle works the head gasket, so a flat, properly finished deck matters. Every deck is inspected and verified for MLS gaskets.
Valves, springs and retainers are installed and ready to bolt on.
| Engine | 6.6L Duramax Diesel (LML) |
| Engine Code | LML |
| Years | 2011β2016 |
| Valve Train | OHV Β· 4 valves per cylinder (16 per head) |
| Valve Material | 21-4N Stainless β Intake & Exhaust |
| Head Material | Aluminum |
| Quantity | Single head |
| Condition | β Brand New β Not Remanufactured |
| Included | Valves, springs & retainers installed |
| Gasket Surface | Pre-milled and verified for MLS gaskets |
| Pressure Test | 60 PSI |
| Core Charge | None β no core required |
| Warranty | 2-Year Unlimited Mileage |
Every head runs through our process, not just pulled off a shelf and shipped.
Every casting is chemically cleaned and blown out, removing machining oils, shavings and debris so your oiling system starts clean.
Final guide sizing and multi-angle valve seat cutting done in-house on our Rottler equipment, so geometry and clearances are right before assembly.
Every head is pressure tested to 60 PSI to confirm there are no porosity leaks or internal defects that could hurt cooling or oiling.
Multi-point inspection of the gasket-sealing surface and bore alignment, because a flat deck is what a good head gasket seal depends on.
Valves, springs, retainers and seals are installed, with spring heights and seal seating checked.
Intake and exhaust ports are vacuum tested to confirm an airtight valve-to-seat seal.
- Confirm your engine with the 8th digit of your VIN: LB7 = 1 Β· LLY = 2 Β· LBZ = D Β· LMM = 6 Β· LML = 8 Β· L5P = Y.
- Not sure? Call us at 727-609-1700 and we will help you confirm fitment.
Planning to run more boost? Pair these with our Duramax Head Stud Kit (2001β2016) and don’t reuse the factory bolts.
Full Year-By-Year Fitment List
2012 Chevrolet Express 2500 Van 6.6L
2013 Chevrolet Express 2500 Van 6.6L
2014 Chevrolet Express 2500 Van 6.6L
2015 Chevrolet Express 2500 Van 6.6L
2016 Chevrolet Express 2500 Van 6.6L
2011 Chevrolet Express 3500 Van 6.6L
2012 Chevrolet Express 3500 Van 6.6L
2013 Chevrolet Express 3500 Van 6.6L
2014 Chevrolet Express 3500 Van 6.6L
2015 Chevrolet Express 3500 Van 6.6L
2016 Chevrolet Express 3500 Van 6.6L
2011 Chevrolet Silverado 2500 6.6L
2012 Chevrolet Silverado 2500 6.6L
2013 Chevrolet Silverado 2500 6.6L
2014 Chevrolet Silverado 2500 6.6L
2015 Chevrolet Silverado 2500 6.6L
2016 Chevrolet Silverado 2500 6.6L
2011 Chevrolet Silverado 3500 6.6L
2012 Chevrolet Silverado 3500 6.6L
2013 Chevrolet Silverado 3500 6.6L
2014 Chevrolet Silverado 3500 6.6L
2015 Chevrolet Silverado 3500 6.6L
2016 Chevrolet Silverado 3500 6.6L
2011 GMC Savana 2500 Van 6.6L
2012 GMC Savana 2500 Van 6.6L
2013 GMC Savana 2500 Van 6.6L
2014 GMC Savana 2500 Van 6.6L
2015 GMC Savana 2500 Van 6.6L
2016 GMC Savana 2500 Van 6.6L
2011 GMC Savana 3500 Van 6.6L
2012 GMC Savana 3500 Van 6.6L
2013 GMC Savana 3500 Van 6.6L
2014 GMC Savana 3500 Van 6.6L
2015 GMC Savana 3500 Van 6.6L
2016 GMC Savana 3500 Van 6.6L
2011 GMC Sierra 2500 6.6L
2012 GMC Sierra 2500 6.6L
2013 GMC Sierra 2500 6.6L
2014 GMC Sierra 2500 6.6L
2015 GMC Sierra 2500 6.6L
2016 GMC Sierra 2500 6.6L
2011 GMC Sierra 3500 6.6L
2012 GMC Sierra 3500 6.6L
2013 GMC Sierra 3500 6.6L
2014 GMC Sierra 3500 6.6L
2015 GMC Sierra 3500 6.6L
2016 GMC Sierra 3500 6.6L
2011 GMC Sierra Denali 2500 6.6L
2012 GMC Sierra Denali 2500 6.6L
2013 GMC Sierra Denali 2500 6.6L
2014 GMC Sierra Denali 2500 6.6L
2015 GMC Sierra Denali 2500 6.6L
2016 GMC Sierra Denali 2500 6.6L
2011 GMC Sierra Denali 3500 6.6L
2012 GMC Sierra Denali 3500 6.6L
2013 GMC Sierra Denali 3500 6.6L
2014 GMC Sierra Denali 3500 6.6L
2015 GMC Sierra Denali 3500 6.6L
2016 GMC Sierra Denali 3500 6.6L
No mileage cap. If a covered defect shows up, we make it right. View full warranty β
No core fee and nothing to ship back. Your old part is yours to keep or dispose of as you see fit.
Heavy Duty Parts Company?
Because a head is only as good as the shop that finished it. Sloppy work means repeat gasket failures and coolant where it doesn’t belong. Ours gets built like we’re the ones who have to answer for it, because we are.
No rebuilt core with a mystery past, no previous owner’s overheating baked into the metal. Fresh casting, start to finish.
Guides sized and valve seats cut on our Rottler equipment, deck and bore inspected, valvetrain assembled, ports vacuum tested. It doesn’t get outsourced and hoped for the best.
Every head gets pressure tested to 60 PSI. A porosity leak gets found on our bench, not in your driveway after a weekend of teardown.
21-4N stainless on the intake and the exhaust. We didn’t cheap out on the part that lives in the fire.
2-year unlimited mileage warranty. No core to ship back, no core fee. If a covered defect shows up, we make it right.
Not sure it fits? Call 727-609-1700 and talk to a person who will help you confirm fitment before you spend a dime.
Please note: Parts, marine, and performance items carry specific warranty limitations. Please review our full Warranty Policy for details.





