Pair Remanufactured Chrysler Dodge Jeep Pentastar V6 3.6L DOHC 24V Cylinder Heads with Head Gasket Set and Bolts

Fully Loaded Replacement – Complete with Valves and Springs, Camshafts, Rockers and Lifters

Restore peak volumetric efficiency and thermal performance with this professionally matched pair of remanufactured aluminum cylinder heads, specifically engineered for the Chrysler, Dodge, and Jeep 3.6L Pentastar V6 engine series. Utilizing the advanced 24-valve Pentastar architecture, these heads feature a high-efficiency DOHC port design precision-machined to meet or exceed original equipment (OE) dimensional tolerances, ensuring a superior head gasket seal and synchronized performance across both cylinder banks.

Each cylinder head undergoes a rigorous multi-stage remanufacturing protocol—including ultrasonic cleaning, precision deck resurfacing, and high-pressure leak testing—to eliminate common failure points such as the valve seat recession or cooling passage obstructions often found in high-mileage Pentastar castings. This matched set is designed to restore factory-spec compression and airflow, correcting common “misfire” codes and valvetrain noise issues. Whether you are performing a top-end overhaul on a Jeep Wrangler, Dodge Durango, or Chrysler 300, these remanufactured heads provide the structural integrity and cooling capacity required to regain your 3.6L V6’s original reliability.

🛠️ In-House Machining Process

• Cleaning: Fully disassembled and thermally cleaned.
• Soda Blasted: Castings are blasted with Sodium Bicarbonate. Because baking soda is water-soluble, there is zero risk of abrasive media clogging oil passages.
• Pressure Testing: Tested to 60 PSI to ensure no cracks or porosity leaks.
• Surfacing: All heads are resurfaced on our Rottler S85A for a precision gasket-sealing surface.
• Valve Job: Multi-angle valve job performed; every port is Vacuum Tested to ensure valves are seated 100% airtight.

📊 Technical Specifications

• Engine Compatibility: 3.6L DOHC 24V Pentastar V6
• Cylinders: V6 engine
• Ready for Installation: Comes fully assembled and ready for direct fitment
• Each Cylinder Head Includes: Valves and Springs Installed, Camshafts Installed, Rockers and Lifters Installed
• Additional Hardware: Head Gasket Set and Bolts

🚛 Fitment Data

Common Applications:

• Jeep Wrangler: 2011-2018 (3.6L JK Body Only)
• Ram 1500: 2011-2018 (3.6L V6)
• Dodge Grand Caravan: 2011-2020 (3.6L V6)
• Chrysler 300: 2011-2023 (3.6L V6)
• Ram Promaster: 2011-2021 (3.6L V6)