Skip to content
Parts expertise. A real person on the phone.727-609-1700

Part, part number, casting number, make or engine size

My Garage Cart

New 2-Barrel BBD Carburetor - Dodge Plymouth 273 318 V8 1966-1973

$150.00

Brand new 2-barrel BBD-style carburetor for Dodge and Plymouth 273 and 318 cubic inch V8 engines, 1966-1973. Heavy duty zinc alloy construction, mounting gasket included. No core charge.

SKU: HDPC-CARB-BBD318 Categories: , Tags: , ,

Description

New 2-Barrel BBD Carburetor — Dodge / Plymouth 273 & 318 V8

Direct Replacement for 1966-1973 Mopar Small Block Applications

A brand-new two-barrel carburetor for the 273 and 318 cubic inch Mopar small block, covering Plymouth cars and Dodge trucks from 1966 through 1973. Heavy duty zinc alloy castings with a mounting gasket included.

Why Replace the Carburetor

These carburetors have been rebuilt and re-rebuilt for decades. Once the throttle bores go oval and the castings warp, a kit stops being a fix. Typical symptoms:

  • Hard starting cold, or flooding once warm.
  • Rough or hunting idle that won’t settle however the mixture screws are set.
  • Hesitation and stumble off idle and under throttle.
  • Poor fuel economy and a persistent fuel smell.
  • Backfiring, overheating and general lack of power.

Once a throttle shaft bore has worn oval it pulls unmetered air, and no rebuild kit corrects that. A new carburetor is the reliable fix.

Features

  • 100% brand new — not remanufactured. No core charge, no core return.
  • Heavy duty zinc alloy construction for heat resistance and long service life.
  • Mounting gasket included.
  • Bolt-on replacement on a matching flange — no modification needed.

Technical Specifications

  • Type: 2-Barrel, BBD style
  • Engine: Chrysler 273 / 318 cu in V8
  • Bolt Hole Spacing: 82.2mm x 47.5mm (center to center)
  • Intake Side Inner Diameter: 36.5mm (both barrels)
  • Choke Air Horn Outer Diameter: 66mm
  • Material: Heavy duty zinc alloy
  • Condition: New
  • Core Return: Not required

Included in the Box

  • 1x Carburetor
  • 1x Carburetor gasket

Fitment Data

  • Plymouth models: 1966-1973 (273 / 318 engine)
  • Dodge Truck: 1966-1973 (273 / 318 engine)

Compare your existing carburetor against the product photo to confirm you are ordering the right unit — several similar-looking Carter units were fitted across this period.

Important — Please Read Before Ordering

  • Professional installation is recommended. No installation instructions are included.
  • Use clean fuel and a clean air filter. Flush the fuel lines before installation — debris out of an old tank will block the fuel and air channels in a new carburetor.

Warranty

  • Warranty: 90-day defect-free warranty. Replacement of defective part only, original purchaser only.
  • Core Return: Not required — this is a new part.

Reviews

There are no reviews yet.

Be the first to review “New 2-Barrel BBD Carburetor – Dodge Plymouth 273 318 V8 1966-1973”
★★★★★
Verified Google Reviews
★★★★★

Great company!! The heads arrived in great shape with all the parts. Very quick email responses to questions, comments, and concerns. One little issue with a few parts but was taken care of promply

— Randy Tinsley
★★★★★

Replacement heads for my 3.5 EcoBoost worked perfect. The kit had everything I needed. The customer service was excellent. Highly recommend this company.

— Alan H. Greendale, Sr.
★★★★★

Parts arrived as promised. Ported heads gave me that low end torque and high rev HP I was looking for! ...if only I did the cam at the same time.

— Kempson Wall
★★★★★

The experience was excellent. My part came sooner than expected and was exactly as advertised. This is how a business should be run. I would give 6 stars if I could, thank you HDPC

— Taylor Mather

Your cart

Your cart is empty.

Shop parts
Your vehicles

My Garage

Keep the right parts one click away.

Add a vehicle

Start with your year. We’ll guide you from there.

Saved in this browser.