Description
New 1-Barrel Carburetor — Chevrolet / GMC 250 & 292 Inline Six
Automatic Choke Replacement for the GM 4.1L and 4.8L Six
A brand-new single-barrel carburetor with integrated choke thermostat for Chevrolet and GMC inline-six engines — the 4.1L 250 and 4.8L 292. Heavy duty zinc alloy construction, supplied with mounting gaskets.
Why Replace the Carburetor
The 250 and 292 sixes are famously long-lived engines, and the carburetor is usually the part holding one back. Worn throttle shafts, a tired choke thermostat and hardened diaphragms produce the usual list:
- Hard starting cold, or flooding once warm.
- Rough or hunting idle that won’t settle however the mixture screws are set.
- Hesitation and stumble off idle and under throttle.
- Poor fuel economy and a persistent fuel smell.
- Backfiring, overheating and general lack of power.
Once a throttle shaft bore has worn oval it pulls unmetered air, and no rebuild kit corrects that. A new carburetor is the reliable fix.
Features
- 100% brand new — not remanufactured. No core charge, no core return.
- Automatic choke with thermostat included — no need to transfer the old one.
- Heavy duty zinc alloy construction, resistant to heat, pressure and corrosion.
- Mounting gaskets included.
- Polished internal surfaces for steady idle and consistent metering.
Technical Specifications
- Type: 1-Barrel
- Engine: Chevrolet / GMC 4.1L 250 and 4.8L 292 inline-six
- Choke Type: Automatic, with thermostat
- Input Voltage: 12V DC
- Bolt Hole Diameter: 74.5mm
- Intake Valve Diameter: 42.8mm
- Choke Valve Inner Diameter: 47.5mm
- Choke Valve Outer Diameter: 66.5mm
- Placement on Vehicle: Front
- Material: Heavy duty zinc alloy
- Condition: New
- Core Return: Not required
Included in the Box
- 1x 1-Barrel carburetor with choke thermostat
- Mounting gaskets
Fitment Data
- Chevrolet L6 4.1L / 250 cu in
- Chevrolet L6 4.8L / 292 cu in
- GMC L6 4.1L / 250 cu in
- GMC L6 4.8L / 292 cu in
Allow 1-2mm variance on listed measurements. Check your measurements and part number against the specifications above before ordering.
Interchange Part Numbers
7043014, 7043017, 7047314, 7047317, 17054303, 17054228
Confirm your old part number matches one of the numbers above before ordering.
Important — Please Read Before Ordering
- This replaces a 1-barrel carburetor, not a 2-barrel. Confirm which unit your engine has before ordering.
- Professional installation is recommended. No installation instructions are included.
- Use clean fuel and a clean air filter. Flush the fuel lines before installation — debris out of an old tank will block the fuel and air channels in a new carburetor.
Warranty
- Warranty: 90-day defect-free warranty. Replacement of defective part only, original purchaser only.
- Core Return: Not required — this is a new part.






Reviews
There are no reviews yet.